N2
Horizontal Wave Soldering System (With Mr. Flip) |
 |
|
HC25-33HNF | HC40-44HNF |
|
Features
-
Elimination of solder skip deffect
of SMC's by uniformly pressuvized primary wave.
-
The soldering machine can be lowered
in total height. Enabling the operator to ensure the effective
monitoring of the process.
-
The horizontal type can realize
an in-line soldering machine system. Rack to Rack. Path line height:1000mm.
-
The installation of large window
on the upper section of the conveyor enhances maintenance procedures.
-
The adoption of castling claws
for lead-free.
-
Motor-driven lifter is mounted
on solder tank up/ down adjusting and drawing out mechanism.
|
For
Lead-Free N2 Inclined Wave Soldering System (With Mr. Flip) |
 |
|
HC33-39NF | HC40-39NF
|
|
Features
-
Compact and tight-sealed M.T.S
(multi-throat stablizer)
-
The minimum installation space
easy operation in N2 wave soldering.
-
No oxidation takes place around
the solder bath, which enable constant clean soldering and makes
regular cleaning easy.
-
The feed direction can be readily
changed for high-precisio soldering.
-
The adoption of castling claws
for lead-free.
-
Motor-driven lifter is mounted
on solder tank up/ down adjusting and drawing out mechanism.
|
For
Lead-Free Local N2 Inclined Wave Soldering System (With Mr. Flip) |
 |
|
HC33-28KDF2 | HC40-32KDF2
|
|
Features
-
The
loading of a local N2 hood.
-
Pre-heater
uses Model-M infra-red system.
-
Motor-driven
lifter is mounted on solder tank up/down adjusting and drawing-out
mechanism.
-
Foam
type fluxer is mountable, as well as a separate spray fluxer.
-
The
adoption of castling claws for lead-free.
|
Air
Inclined Wave Soldering System (With Mr. Flip) |
 |
|
HC33-32LF2 | HC40-32LF2
|
Features
- Completely lead-free
FLIP type solder pool, high precision preheat.
- Standard gear for spot
cooler!!
Optimum soldering has been realized.
- Secondary nozzle former
remote adjustable mechanism
Remote control with note-type personal computer. (Option)
- Central control with
touch panel
|
Inclined
Lead-Free Wave Soldering System (With Mr.Flip) |
 |
HC33-30SSF
|
Features
Wave
Soldering Machine (Lead-free)
- Integrated
external clear polycarbonate display window for easy viewing og
soldering process.
- Special
heater tube material ensures longer heater life span.
- Equipped
with audio and visual alarm system.
- Overloading
protection over motors and circuitries.
- Automatic
speed controlled system ensures stable claw finger conveyor speed.
- Special
heat resistant plastic claw fingers minimize heat loss from PCB
to claw fingers.
- Well
distributed air from outlet cross-blow fans cool PCB rapidly,
increasing the soldering strength.
- Uniquely
designed solder pot (Manufactured in Japan) with smoother wave
surface and 40% reduction of solder dross.
- "SP"
coating to prevent solder pot corrosion and leaking.
Colling Fans
- Turbo cooler fans at top + bottom
side (Air conditioned type spot cooler is available as option)
Pre-heater zone
- Higher power sheath pre-heater
in its class. The eater zone is significantly wider. The pre-heater
zone lenght is 1240mm.
- Stainless steel pre-heater cover
is standard.
- Two independent controllers for
the-zone pre-heater.
Solder pot and nozzle
- Suitable for Pb free and eutectic
solder. More powerful jet, lesser dross, low solder capacity pot.
- Mounted on the Flip pot
includes the new generation "PARROT III" secondary
nozzle.
|
|